How To Clean Bath Toys And Keep Mold At Bay!

Cleaning your baby’s bath toys is often not the first thing in mind during purchase until you find mold inside bath toys, so let’s try to figure out the most effective way of how to clean bath toys and if you simply running water bath toy actually works.

The good news is you can use your dishwasher or soap and water, depending on the material

A nice soothing bath time is ideal before sleep time and learning how to sleep train a 12 month old as a newborn is recommended for all parents. 

Still, you’ve been using your bath toys for years, making it the perfect breeding ground especially for the hard plastic toys.

They’ve been in the hot water, covered in soap scum and mildew, and you don’t know how to get them clean and mold free.

You’re not alone! This problem plagues parents everywhere, especially for that rubber ducky that must be used every bath time: how do you clean bath toys?

Fortunately, we’ve got some tips that will help you keep your kids’ bath toys clean and looking like new! Double the fun with bath tips and activities for babies and toddlers.

And for quick fixes for the broken toys, consider using a hot glue gun.

How do you disinfect toys in a bathtub?

You can disinfect toys in a bathtub by adding 1 cup of bleach to the water. Mix thoroughly, then soak the toys until the bleach solution covers them completely. 

What is the black stuff that comes out of bath toys?

The black stuff that comes out of bath toys is mold. It’s not a good thing!

It means that your toy has been exposed to moisture for too long. And the spores initially on the surface have grown into a visible mold. If you notice this black stuff, don’t use it again until you’ve cleaned it thoroughly.

How do you get mildew out of bath toys?

If you wish to clear mildew from your bath toys, try cleaning them with baking soda.

Sprinkle baking soda on the affected area and let it sit for several hours. Then wash the toy with warm water and soap and rinse thoroughly.

How do you get stains out of bath toys?

To clean stains on your bath toys, put them in a pot of boiling water and let them soak overnight.

Scrub with toothpaste and use dish soap to wash them off after approximately twenty-four hours.

How to clean bath toys

Depending on the material, there are a few ways to clean bath toys.

Plastic, rubber, and vinyl toys can be washed in the dishwasher or by hand with soap and water. Always choose the right toys for your baby’s safety. Or opt for these DIY toys for babies.

Bath toys made of wood should be hand-washed in warm soapy water and rinsed thoroughly.

If you have painted wooden bath toys, gently rub them with a soft toothbrush to remove any dirt from between the cracks.

Use a wet cloth or sponge to wipe down the surface for silicone bath toys. Never submerge these toys in water because this can cause them to break down over time.

Read on for tips on how to clean babies’ bath toys:

Use vinegar

Vinegar is a natural disinfectant that can help you get rid of soap scum, mildew, and mold.

Toss your toys in a large mixing bowl with 1 cup of white vinegar. Allow an hour of sitting time in the vinegar before rinsing with water.

It will help in the removal of stains from plastic toys, restoring them to their original state! 

Wash with baking soda and water

Baking soda has many uses around the house, and you can use it to clean your toys as well! Simply mix two tablespoons of baking soda with 1 cup of warm water until it forms a paste-like consistency. 

If needed, add more baking soda, so it’s thick enough not to run off the toy when you rinse it.

Then just rub the paste onto your dirty bath toy and let it sit for 5 minutes before rinsing off with warm water! The baking soda will help remove any dirt or stains from your toys, making them look brand new again!

Wash Them After Every Bath

If your baby has been playing with their toys in the water, it’s important that you wash them after every bath.

This will help prevent mold from growing on any toy your child played with in the tub. It also keeps everything looking nice and clean for the next bath!

Ensuring your baby’s safety at all times is crucial. Are you wondering when to stop worrying about SIDS? 

Scrub them with a toothbrush

A toothbrush is designed to get into the tiny crevices of your child’s bath toys and works great for cleaning those hard-to-reach areas.

Make sure you don’t use an old toothbrush that has been used by someone else.

The bacteria from their mouth could be transferred to your child’s toy, which could cause illness or even death if ingested.

You can put them into a bag in the dishwasher

Add a little soap and run it through the regular wash cycle. This is good for any plastic items with water-based paint or ink. It will wash off most stains and leave your toys looking new!

It ‘s also a good way to disinfect baby bottles, also find out how to store baby bottles for next baby.

Toys made of rubber can also be placed in the dishwasher.

Ensure that there aren’t any parts that will fall off or come apart during the washing process.

This could cause damage to your dishwasher if it doesn’t fit properly into the racks or has loose parts that could break off during cleaning.

Vinegar, baking soda, and lemon juice

These three ingredients work together to make a safe, natural cleaner for all surfaces.

Mix equal amounts of each in a spray bottle, then shake well before using. Spray the solution onto your bath toys and let it sit for at least 30 minutes before rinsing with warm water.

You can use soap and water on toys you cannot put in the dishwasher

Try dish soap and warm water.

Dish soap is another great natural cleaner that works well on mold and mildew.

Simply immerse the bath toys in a bowl of warm water mixed with dish soap and let them sit for 15 minutes before rinsing thoroughly with warm water and air drying until completely dry before putting away.

Rubbing alcohol or hydrogen peroxide (optional)

If you see any marks or stains on your bath toy, such as lipstick on rubber ducks or marker on plastic fish, try rubbing alcohol or hydrogen peroxide to remove them.

First, wipe down the area with vinegar and baking soda, then dab on some rubbing alcohol or hydrogen peroxide with a cotton ball until the mark disappears.

Finally, rinse with warm water and air dry before putting it away!

Bleach them

If you don’t have any white vinegar handy, try using bleach instead.

Bleach is another natural disinfectant that kills germs like E. coli and salmonella.

Which can be found in feces — on bath toys easily without harming your child’s skin or hair when used in moderation (that means just one tablespoon per gallon of water). 

It should only be used on rubber or plastic toys, though—not those made from wood or metal, because they could be damaged by its strong chemical composition if left in too long (we’re talking hours here). 

To use bleach as a cleaner for rubber or plastic bath toys:

Fill your sink with warm water and add one tablespoon of bleach for every gallon of water. Soak your toys for at least 30 minutes before rinsing them off with clean water.

Don’t forget that other accessories like the pacifiers also need a good clean frequently. So which one does your little one prefer thumb sucking vs. pacifier?

The Boiling Water Method

Put your toys in a big pot and cover them with boiling water. Let them soak for 10 minutes to kill any germs. Then rinse them off with cold water.

Let the toys dry for several hours

Make sure you dry them thoroughly before placing them back in the tub.

This will prevent mold and mildew growth on your children’s toys, which can cause irritations and infections when they come into contact with their skin during playtime.

How to clean bath toys with vinegar

When it comes to cleaning your babies’ bath toys, vinegar is your best bet.

It’s safe, inexpensive, and environmentally friendly. Looking for more baby toys and accessories? Basket ideas for a baby couldn’t be more perfect every season! 

To clean bath toys, you’ll need:

  • Bath toys
  • Vinegar
  • A clean towel or rag.

Step 1:

Pour a small amount of vinegar into the tub. You don’t need to fill it up, just enough to cover the bottom.

Step 2:

Place your bath toys in the vinegar solution for about 15 minutes. You can let them soak overnight to make sure they are spotless.

Step 3:

Remove the bath toys from the vinegar solution and rinse them off with water. If there is still soap residue left on your bath toy, repeat this process until all of it has been removed from the toy.

How to clean moldy bath toys

Mold is a type of fungus that grows in damp, dark places. It can be found in your bathroom, under your kitchen sink, and in your laundry room.

It’s not just unsightly; it can also cause health problems.

Mold can irritate your eyes and lungs, trigger asthma attacks and worsen allergies. It can also make you sick with flu-like symptoms.

Parents should be conscious of any habits that may risk their baby’s health and development, thinking about how and when to stop using the baby monitor?

What causes mold on bath toys?

Bath toys get moldy because they are made of porous material such as rubber or plastic.

These materials can absorb moisture and hold onto it, which is why your bath toys will often come out of the water with a lot of extra water trapped in them. 

This water can be a breeding ground for mold and mildew to grow on the toy’s surface, so it’s important to make sure you dry those toys off each time you use them to prevent this from happening.

Mold thrives on moisture, so it’s important to find ways to keep your home dry at all times.

Here are some steps to get rid of moldy bath toys:

Wash Your Hands

First, wash your hands thoroughly with soap and water for at least 20 seconds. This will kill any germs on your hands before you start cleaning.

Remove the Moldy Bath Toys from the Water

Use rubber gloves if available, or use a towel or other cloth to protect your hands while removing the toys from the water.

Pull out as many toys as possible without getting them soaked — this will save time later when they need to be dried off completely before being used again. 

If there’s a lot of mold on the toys, consider submerging them overnight in a bleach solution (1/4 cup bleach per gallon of water) so that all surfaces are sanitized and ready for washing once you’re done cleaning.

Another option is to put your toys in the dishwasher using a rinse cycle only or run them through the washing machine on a gentle cycle using detergent and warm water. 

If you prefer not to use bleach or harsh chemicals on your children’s toys, you can make your non-toxic cleaning solution by mixing equal portions of white vinegar and hydrogen peroxide (3 percent hydrogen peroxide). 

Keep in mind that it’s never too late to learn something new about bathing your baby.

Easy ways on how to clean bath toys!

So there you have it!

You can clean your babies’ bath toys in the dishwasher or wash them by hand. You should also remember to keep them away from water sources, so they don’t get moldy.

(Visited 161 times, 1 visits today)